Luoyang Filier Special Gas Co., Ltd
Luoyang Filier Special Gas Co., Ltd
Location:Home > News

What are the functions of sulfur hexafluoride recovery and purification unit

Published on:2018-11-23 Click:234

六氟化硫回收净化装置使用作用有哪些

Sulfur hexafluoride recovery and purification unit is mainly a technical unit for SF6 recovery, purification and purification. In the SF6 gas recovery and purification tank, the unit conducts gas-liquid separation for the SF6 gas-liquid community entering the SF6 recovery and purification tank, and cools the liquid part to separate the gas dissolved in it.

The recovery and purification tank is divided into upper and lower parts through the partition. A passage is opened on the partition. On the channel, there is a valve that controls the opening and closing of the channel through the handle and valve stem. The upper part of the tank body is provided with a vacuum port controlled by a ball valve. The tank is the main body of sulfur hexafluoride recovery and purification unit.

As one of the widely used gases in the electrical industry, sulfur fluoride is non-toxic and harmless in the high-purity state, but it will be toxic once the gas is impure. Therefore, in production, it is necessary to adopt a recovery and purification device for recovery.

The sulfur hexafluoride recovery and purification unit is internally equipped with a phase sequence protector to ensure that the problem of inversion caused by phase sequence error of the host can be avoided at any time. The sulfur hexafluoride recovery and purification equipment is of high quality brand in the electrical system to ensure clean recovery and purification.

Due to the use of high-quality casters, the sulfur hexafluoride recovery and purification equipment will greatly protect the ground paint, effectively reduce the labor required for pushing, and save time and labor when moving. The whole machine is air-cooled, so no external water source is required.

The sulfur hexafluoride gas recovery unit is equipped with a drying and heating system. After ensuring that the desiccant is saturated, the desiccant can be activated and regenerated through equipment heating, so that the desiccant can be reused. Therefore, the desiccant does not need to be replaced, and it is convenient to use.

The content of the article comes from the recovery and purification of sulfur hexafluoride: http://www.feiliergas.com


Disclaimer:Some of the pictures and texts in this site are collected and collated from the network for learning and exchange only. The copyright belongs to the original author, which does not represent my point of view. This website will not assume any legal responsibility. If it infringes your rights, please contact us to delete it.

Home

Product

Mobile

Navigation

TEL

0379-69916171

scan

scan