Sulfur hexafluoride manufacturers in the production,because sulfur hexafluoride is toxic,harmful to human body.Therefore,some safety measures should be taken to avoid accidents.Among them,the sulfur hexafluoride circuit breaker inflation is the commonly used protective measures.Below,Xiaobian will talk about how to inflate the circuit breaker.

　　First of all,the circuit breaker will be out of operation,at the same time,sulfur hexafluoride manufacturers should also do a good job of safety protection.The sulfur hexafluoride gas cylinder is then placed upright and connected to the gas-filled pressure reducing valve,and the gas-filled pipe is connected to the pressure-reducing valve.

　　Secondly,open the cylinder valve door,sulfur hexafluoride manufacturers open the pressure reducing valve,maintain the low pressure side pressure value,and then use a purple copper rod with a diameter of 8 mm,open the valve spool of the inflation pipe,deflate for 5 to 10 seconds,and flush the pipe.

　　After the test,measure the temperature around the sulfur hexafluoride gas circuit breaker.According to the temperature-pressure curve,check the actual value of rated pressure of the circuit breaker when charging.According to the temperature of the day,the end inflation pressure of the circuit breaker is obtained.Unscrew THE PLUG UNDER the transmission box,connect the pneumatic tube,slowly open the pressure reducing valve,and inflate the circuit breaker.If you have any questions,welcome to consult!For more information,call 139-4929-0069